iSEMC has introduced a large-screen splicing solution that realizes point-to-point output. The point-to-point video wall solution of iSEMC 4K video wall controller has the following characteristics...
We all know that the conventional resolution of the video wall is 1080P, which is 1920*1080.
Many manufacturers often tell consumers that the resolution of the video wall after splicing is calculated by superposition. For example, the resolution of 4 screens is 3840*2160 after splicing, which is not quite correct here.
Because although the resolution is calculated by superposition, the resolution will gradually decrease as the stitched screen becomes larger.
Therefore, the engineers of iSEMC tell everyone that if the conventional solution is adopted, it is recommended not to splice more than 16 screens.
In order to solve this problem, iSEMC has introduced a large-screen splicing solution that realizes point-to-point output.
1. The screen output is ultra-high-definition
The traditional video wall solution is actually the effect after the 1080P picture is enlarged, so this is why the larger the screen splicing, the more blurred the picture.
iSEMC adopts point-to-point technology. The definition of each screen is 1080P, not the enlarged effect. After the overall splicing, the video wall screen can be displayed in 4K 8K 16K full HD.
2. The screen output is not deformed
The resolution of a single video wall is 1080P, which is what we often call the golden ratio 16:9. The picture under this ratio is the most comfortable to watch and the best effect.
If you want to achieve a 16:9 ratio of the overall video wall, then the splicing scheme is generally 2*2 3*3 4*4, etc.
However, some customers want to splice in some unconventional ways, such as 2*3 2*4 3*4, etc., the final picture effect will often show varying degrees of deformation and stretching.
This problem can be easily solved if iSEMC's point-to-point technology is adopted.
3. do not occupy terminal computer resources
The iSEMC point-to-point splicing solution is a separate pure hardware technology and does not rely on the computer operating environment. After the full screen and split screen effects are achieved, it does not occupy any PC resources.
Therefore, the computer configuration requirements are not high, and it is especially suitable for control room occasions and environments that need to run large-scale software for real-time display.
4. Simple configuration and maintenance
Post-maintenance costs are also an important factor for many customers to choose manufacturers and products. iSEMC's product design concept is also based on customers.
The iSEMC point-to-point solution adopts pure hardware design, and it can be run through simple settings.
The above are some features of iSEMC4k video wall controller point-to-point splicing solution
If you want to have a deeper understanding of ultra-high-definition video wall solutions, you can consult the official iSEMC.
